Related Manuals; Terms And Definitions - Omron 3G3RX-V1 Series Connection Manual

1. Related Manuals

The table below lists the manuals that relate to this document.
To ensure system safety, make sure to always read and heed the information provided in all
Safety Precautions, Precautions for Safe Use, and Precaution for Correct Use of manuals for
each device which is used in the system.
Cat.No.
W500 NJ501-[][][][]
NJ301-[][][][]
W501 NJ501-[][][][]
NJ301-[][][][]
W497 CJ1W-DRM21
W267 -
W504 SYSMAC-SE2[][][]
W464 -
I578 3G3RX-V1-[][][][][]-V1
I581 3G3AX-RX-DRT-E

2. Terms and Definitions

Term
Master/Slave
EDS file
Node address
(MAC ID)
Scan list
Model
NJ-series CPU Unit Hardware User's Manual
NJ-series CPU Unit Software User's Manual
CJ-series DeviceNet™ Units Operation Manual for
NJ-series CPU Unit
DeviceNet™ Operation Manual
Sysmac Studio Version 1 Operation Manual
CX-Integrator
Operation Manual
RX Series Type V1 High-function General-purpose
Inverter User's Manual
MX2/RX Series DeviceNet Communications Unit User's
Manual
A master is a unit that controls the DeviceNet communications.
A master sends output data to multiple slaves and receives input data from
the slaves.
Slaves receive output data that are sent from the master, and send input
data to the master.
At least one master is required for DeviceNet communications.
An EDS file is a file that contains the I/O points of DeviceNet slave units
and the parameters that can be set via DeviceNet.
A node address is an address to identify a unit connected to a DeviceNet
network. With DeviceNet, a MAC (Media Access Control) ID is used as a
node address. Thus, a node address is a MAC ID.
A scan list is used to register slaves with which a master communicates in
DeviceNet remote I/O communications. A master communicates with the
slaves based on the scan list settings.
Manual Name
Ver.2 Network
Explanation and Definition
1．Related Manuals
Configuration Tool
1