3
Set the parameter by using the
procedure on the right.
[C102] Reset selection: 03
*Set 03 (Trip reset only). By
setting this value, the
communications connection is
not reset even if the Inverter is
reset.
a002
Press the Mode Key twice.
c001
Parameter C001 is displayed.
Press the Increment Key and display
C102.
c102
Press the Enter Key.
02
The default data is displayed.
Press the Increment Key once.
03
The data is changed to 03.
Press the Enter Key.
c102
The parameter is displayed again.
7.Connection Procedure
The parameter is displayed.
Parameter C102 is displayed.
17