Precor P10 Operating And Maintaining page 29

Setting Up the Console
Product
All
All
All
All
All
All
Event (Error) Log
This log holds a maximum of 30 events. After the log reaches
30 events, older events are erased to make room for newer
ones. To clear an event from the log, press and hold the Quick
Start key while the event is displayed.
The event log (sometimes referred to as an error log)
contains the following information:




Value
UPPER BASE
SW PART
NUMBER
LOWER BASE
SW PART
NUMBER
METRICS
BOARD
SERIAL
NUMBER
USAGE LOG
ERROR LOG
Event number
Odometer value when the event occurred
Hour meter value at the time the event occurred
Current drawn by the motor and available voltage when
the event occurred (treadmill only)
Information provided
Displays the upper base application
software version.
Displays the lower application
software version.
Displays the software number on the
Metrics Board.
Displays the model and type of
equipment.
• Displays the number of times
each workout has been used and
displays the associated
cumulative minutes.
• Displays the user preferences in
workout selection.
Displays any event codes that may
have been detected by the software.
For more information, refer to Event
Log.
27