Precor P10 Operating And Maintaining page 25

Setting Up the Console
Set Speed Limit (Treadmill only)
Value Range: Full speed range of equipment
(Default: Maximum speed)
This setting limits how fast the running belt moves and,
consequently, the number of speed settings that are available
to the user. Use it to set the maximum speed that a user can
enter when using the equipment.
The speed is displayed in miles per hour (mph) or kilometers
per hour (kph) depending upon the units of measure (U.S.
Standard or Metric) selected earlier. The values range from
0.5 to 12 mph (0.8 to 20 kph).
Set Incline Limit (Treadmill only)
Value Range: Full grade range of equipment
(Default: Maximum grade possible)
Select the maximum percent incline that a user can enter
when using the equipment. Values range from 0.0 to 15.0.
Hidden Programs (Treadmill only)
Value: Show Programs or Hide Programs
(Default: Hide Programs)
When this option is set to Show Programs, the user can
select between the Track workout and the Fitness Test.
Otherwise, only the Track workout is available.
Remote Speed Control (Treadmill only)
Value: Enable or Disable
(Default: Disable)
When this feature is enabled, the CSAFE SetSpeed command
and the CSAFE SetGrade command are available if:


The treadmill is in the CSAFE "InUse" state.
The speed or grade values sent are within range.
23