Precor P10 Operating And Maintaining page 28

26
Use the following table to set up customized Informational
Display values.
Table 3. Informational Displays values
Product
All
AMT
All
Treadmill
All
Operating and Maintaining the P10 Console
Value Information provided
ODOMETER Correlates to the type of equipment
and the standard of units, U.S. or
Metric, selected in the programs.
•
•
•
BELT USAGE •
•
•
HOUR METER Displays the number of hours that the
equipment has been in use.
Note: The equipment tracks the
elapsed minutes, but the value that
appears is truncated to the nearest
full hour.
BELT RATING Displays the condition of the
treadmill's running belt as a number
between 0 and 10. If the rating is 0 or
1, you should replace the belt.
UPPER BOOT Upper board application software
SW PART part number and version.
NUMBER
Treadmill and AMT: Displays the
number of cumulative miles or
kilometers logged to date. In
addition, the AMT displays the
number of vertical strides.
EFX: Displays the number of total
strides logged to date.
Bike: Displays the number of total
revolutions logged to date.
Belt Stride Count: Tracks the
number of strides on equipment.
Stride Count Reset: Reset
increases by one each time a
reset is performed.
Odometer at Last Reset: Records
the odometer reading at the time
the belt was changed. The
equipment odometer continues to
count forward after the belt
change.