Precor P10 Operating And Maintaining page 122

60
Table 4. Active status light appearances and their meanings
Status light
appearance
Steady (solid)
blue
Pulsing blue
Steady (solid)
yellow
Pulsing yellow
Assembling and Maintaining TRM 800-Series Treadmills
Meaning
The treadmill is
operating normally and
does not currently need
maintenance.
The treadmill is due for
scheduled maintenance
(P80 console only), or
the treadmill belt needs
to be replaced (except
for 230 V models).
The treadmill has
detected and recovered
from an error. It can still
be used, but some
functions may not be
available.
The treadmill has
detected an error, has
been unable to recover
from the error, and has
taken itself out of
service.
Action required
None.
Perform the needed
maintenance, then reset
the status light.
Refer to the console's
event log for more
information.
Power-cycle the
treadmill (switch it off,
wait 30 seconds, then
switch it on again). If the
error occurs again,
check the console's
event log for more
information, then
contact Precor
Customer Support.