20
CAUTION: If you change the Unit of Measure display on the
treadmill, check the speed setting to verify that it is correct.
To view the Club Settings:
1.
2. Press the following number keys in sequence to enter the
3. Press OK.
Table 2. Navigational keys for the system setting modes
Key
▲ or
▼
OK
CLEAR Returns to the previous menu level without saving changes
PAUSE Exits the System Settings mode and returns to the
At the Welcome banner, press Pause.
password:
5 6 5 1 5 6 5
The Set Club Parameters banner appears.
Function
Navigates the settings menu
Selects a menu setting and confirms the changes made to
the value setting
Welcome banner
Operating and Maintaining the P10 Console