Console and Modem Ports
The Console port is an RJ-45 serial console port connector, for vt100 terminal emulator
programs to perform local configuration and administration.
The Modem port is an RJ-45 serial console port connector, for establishing remote console
sessions using dialup connections through a 9600 bps modem connected via an RS-232
cable. Dialing into the modem establishes the dialup console connection.
The table below lists the RJ-45 to DB-9 adapter connection definitions. To employ a
standard UART port, both the console and the modem ports use this configuration.
DB9
Signal
1
Data Carrier Detect
2
Received Data
3
Transmitted Data
4
Data Terminal Ready
5
Signal Ground
6
Data Set Ready
7
Request To Send
8
Clear To Send
9
Ring Indicator
Compact Flash Card Slot
The NetScreen-200 Series supports CompactFlash
capacities. NetScreen has tested SanDisk 96MB and 512MB cards. The NetScreen device
automatically detects the presence of a flash card and records the system log to it.
NetScreen-200 Series
Abbreviation DTE
DCD
In
RD
In
TD
Out
DTR
Out
SGND
N/A
DSR
In
RTS
Out
CTS
In
RI
In
™
cards with a variety of memory
The Front Panel
DCE
RJ-45
Out
NC
Out
3
In
6
In
7
N/A
4
Out
2
In
8
Out
1
Out
NC
5