Replace Routing Engine Components
2.
Figure 40: Remove the PC Card
Insert the PC Card
To insert the PC card, follow this procedure (see Figure 41):
1.
2.
114
M5 and M10 Internet Routers Hardware Guide
When the PC card pops partially out of the slot, grasp the card and pull it straight
out of the slot.
Orient the PC card with the Juniper Networks logo facing in the direction specified on
the Routing Engine faceplate. Insert the card into the slot.
Press the card firmly all the way into the slot. Note that the PC card slot might be
located in a different position from that shown in Figure 41.
Eject button