Dc Power Supply; Figure 9: Dc Power Supply; Table 5: Electrical Specifications For Ac Power Supply; Table 6: Electrical Specifications For Dc Power Supply - Juniper M10 Hardware Manual

Juniper router hardware guide
Hide thumbs Also See for M10:
Table of Contents

Advertisement

Power Supplies

Table 5: Electrical Specifications for AC Power Supply

DC Power Supply

A DC-powered router has two load-sharing DC power supplies, located at the bottom rear of
the chassis, as shown in Figure 3. For information about power supply redundancy and
replaceability, see "Power Supplies" on page 16.
Figure 9 shows the power supply and Table 6 lists electrical specifications. For information
about the LED and self-test button, see "Power Supply LEDs and Self-test Button" on page 19.

Figure 9: DC Power Supply

Table 6: Electrical Specifications for DC Power Supply

18
M5 and M10 Internet Routers Hardware Guide
Description
Specification
Maximum power output
800 W
AC input voltage
Nominal range: 100–240 VAC
Operating range: 100–264 VAC
AC input line frequency
47 – 63 Hz
AC input current rating
8 – 4 A
Output voltages
+1.5 V, +2.5 V, +3.3 V, +5.0 V, +12 V, +12 V
Quick connect
terminals
Status LED
Self test
button
Description
Specification
Maximum power output
700 W
DC input voltage
Nominal: –48 VDC, –60 VDC
Operating range: –42.5 to –72 VDC
Power switch

Advertisement

Table of Contents
loading

This manual is also suitable for:

M5

Table of Contents