Tunnel Services Pic - Juniper M20 Pic Manual

Tunnel Services PIC

Software release
Description
Hardware features
Software features
LEDs
JUNOS 3.3 and later
Power requirement: 0.07 A @ 48 V (3.4 W)
Loopback function that encapsulates and de-encapsulates packets
SONET/SDH OC12/STM4 tunneling bandwidth
For a list of the software features available for services PICs, see the JUNOS Services Interfaces
Configuration Guide.
IP-IP unicast tunneling
GRE unicast tunneling
PIM sparse mode unicast tunneling
One tricolor:
Off—Not enabled
Green—Online with no alarms or failures
Amber—Online with alarms for remote failures
Red—Active with a local alarm; router has detected a failure
Tunnel Services PIC
67
Tunnel Services PIC