Tunnel Services Pic - Juniper M120 Pic Manual

M120 Internet Router PIC Guide

Tunnel Services PIC

Software release
Description
Hardware features
Software features
LEDs
114
Tunnel Services PIC
JUNOS 8.0R2 and later (Type 1, Type 2, and Type 3)
NOTE: This PIC is not supported in JUNOS Release 8.1R1.
Power requirement: 0.07 A @ 48 V (3.4 W)
Loopback function that encapsulates and de-encapsulates packets
OC12/STM4 tunneling bandwidth on FPC1; OC48/STM16 tunneling bandwidth on FPC2;
OC192/STM64 tunneling bandwidth on FPC3
For a list of the software features available for services PICs, see the JUNOS Services Interfaces
Configuration Guide.
IP-IP unicast tunneling
GRE unicast tunneling
PIM sparse mode unicast tunneling
One tricolor:
Off Not enabled
Green Online with no alarms or failures
Amber Online with alarms for remote failures
Red Active with a local alarm; router has detected a failure