Adaptive Services Ii Layer 2 Services Pic - Juniper M20 Pic Manual

M20 Internet Router PIC Guide

Adaptive Services II Layer 2 Services PIC

Software release
Description
Hardware features
Software features
LEDs
10
Adaptive Services II Layer 2 Services PIC
JUNOS 7.5 and later
Supports Layer 2 Service package only. Tunnel services are included with the PIC. Other
services require an individual license.
Power requirement: 0.4 A @ 48 V (19 W)
Support for up to 2000 service sets
Support for MTUs up to 9192 bytes for Gigabit Ethernet and SONET interfaces
Depending on your JUNOS release and individual licenses, software features for this PIC can
include the features listed in Table 5 on page 11. For more information about the software
features available for services PICs, see the JUNOS Services Interfaces Configuration Guide.
Status LED, one tricolor:
Off—PIC is offline and it is safe to remove it from the chassis.
Green—PIC is operating normally.
Amber—PIC is initializing.
Red—PIC has an error or failure and no further harm can be done by removing it from
the chassis.
Application LED, one bicolor:
Off—Service is not running.
Green—Service is running under acceptable load.
Amber—Service is overloaded.