Introduction; General Description; Features - NAPCO MAGNUM ALERT 1008e Installation Instructions Manual

1. INTRODUCTION

GENERAL DESCRIPTION

The MAGNUM ALERT-1008e and MA1008eM are micro-
computer-based eight-zone control panels with provisions for
Ambush, three Keypad Panics (Fire, Police and Auxiliary), a
supervised Fire Zone and a variety of reporting features. An
event log, accessible only through Napco PCD2000 Quick-
loader software, monitors up to 82 prior events.
MA1008eM "Mercantile" version is supplied with a heavy-
duty enclosure for increased tamper resistance and a tamper
switch for tamper protection. (Note: Do not use Fire Zones in
a Mercantile Installation).
The system is contained within a wall-mounted enclosure
and Includes an integral digital communicator and a power
transformer.
The keypad allows the user to:
• arm and disarm the system
• check the status of each zone
• check which zones were violated after an alarm
• selectively bypass one or more zones
• display bypassed zones
• cancel entry delay
• send a Panic or Ambush alarm
• enter or change arm/disarm codes
• test the audible alarm and backup battery
• test each zone for problems (Fault Find)
• test the telephone line while disarmed
• reset AC-Failure indication
• bypass a Priority Zone with Bypass
• turn the Chime feature on/off
• program zone features and communicator information
Four LEDs, a display and a sounder an the keypad provide
visual and audible system and individual zone status Informa-
tion. Most keys have secondary functions that are accessed
by holding down the key until the sounder beeps, and are
therefore termed "hold-down" functions. The following hold-
down functions are provided:
Key [1]: Alarm Test
Key [2]: Display Bypassed Zones
Key [3]: Display Status
Key [4]: Instant Alarm (cancels entry delay)
Key [5]: Chime on/off
Key [6]: Communicator Confidence Test or Manual
Download (see text)
Key [7]: Fault Find
Key [8]: Program
Key [9]: Reset (System-trouble indication; Failure-to-
Communicate sounder; Day Zone Indication; Alarm-
Memory display; Fire Zone; Fault-Find mode; Bypass
Priority-with-Bypass; and Power-Up Delay)
Key [B]: Alarm History (indicates last alarmed zone
(s))
The panels may be programmed in a variety of ways: (a)
from the keypad, in its secondary Dealer-Program Mode of
operation; (b) from a PROM (programmable read-only mem-
ory), which is itself programmed on an accessory program-
mer; or (c) from an IBM PC-compatible computer using
L
NAPCO Security Systems
Napco's PCD-Windows Quickloader Download Software.
Designed for use with the PCI2000 Computer Interface Kit,
the MA1008e includes a modem to permit remote download-
ing/uploading over telephone lines or local downloading using
a PCL2000 Local Download Cable.
The

FEATURES

Protection Zones
• Seven end-of-line-resistor supervised zones.
• Two separately-programmable entry delays for Exit/
Entry Zones.
• Burglary Zone options include:
- Priority or Priority with Bypass
- Selective or Group Bypassing
- 24-Hour Protection
- Day Zone Supervision
- Auto Reset
- Exit/Entry Delay 1; Exit/Entry Delay 2
- Preprogrammed Auto Bypass (removable)
- Optional 50mS or 7mS Loop Response (normally
750mS)
- Programmable Abort Delay
- Fire on Burglary Zone
• Separate supervised Fire Zone
• Three keypad panics
Alarm Outputs
• Timed Burglary (sweep siren) and Fire (steady siren)
Output: Programmable by zone and time
• Timed Fire Output: Fixed to dedicated and programmed
Fire Zones, programmable for time
• Pulsing Steady Siren Output: Fixed to dedicated and
programmed Fire Zones, programmable for time
• NTO (No Timed Output) Lug
• Optional voltage on alarm
Keypad Functions
• Keypad permits:
- Arm/Disarm Code Selection of up to 8 user codes, up to
4 digits each
- Digital Code Entry to arm and disarm system
- Selective and Group Bypass Selection
- Panic Zone Activation
- Ambush Activation
- Hold-Down Function Access
- Resetting of various functions and conditions
- Programming zone features and communicator options
• LED display:
- Alarm State (armed/disarmed) (ARMED/ALARM)
- Zone Status (STATUS) - one or more zones in trouble
- Zones Bypassed - one or more zones removed
- Fire Zone Status (FIRE/TROUBLE)
- System troubles
• Display Indicates:
- Zone(s) in alarm and alarm history
- Zone(s) in trouble
- Zone(s) bypassed
- System troubles
- Programmed data entries (Dealer Program Mode)
MA1008e / 1008eM Installation Instructions
Page 3