NAPCO MAGNUM ALERT-825 Operating Manual

Security system
Hide thumbs Also See for MAGNUM ALERT-825:

Advertisement

Quick Links

OPERATING
GUIDE
FOR YOUR
MAGNUM ALERT-825/
MAGNUM ALERT-825HS

SECURITY SYSTEM

N A P C O
NAPCO
1880,
0
Technical Manuals Online! - http://www.tech-man.com

Advertisement

Table of Contents
loading

Summary of Contents for NAPCO MAGNUM ALERT-825

  • Page 1: Security System

    OPERATING GUIDE FOR YOUR MAGNUM ALERT-825/ MAGNUM ALERT-825HS SECURITY SYSTEM N A P C O NAPCO 1880, Technical Manuals Online! - http://www.tech-man.com...
  • Page 2 Please read this guide thoroughly The Napco Magnum Alert-8254 to familiarize yourself with your new 825HS has such a wide variety of security system. Keep this booklet features that few, if any, security handy for future reference. Note systems will ever need them all.
  • Page 3: Central Station

    Control Center Report 24 Hour Zone: Are always armed and The heart of the Magnum Alert-825 security A communication sent to a central station ready at all times to respond to an emer- indicating a specificchange in condition of system: it controls all system functions.
  • Page 4 Mint-Sounder lndicator Lights Steady Tone: day zone in trouble; ARMED/MEMORY (Red) entry delay in progress; system Steady- system is armed. armed with a priority zone in trouble. Flashes alarm condition. Flashes indicate the number of Beep (2 seconds): system armed zone(s) which were violated.
  • Page 5 Keys Key 9: RESET Key 3: STATUS INDICATION NOTICE:Keys1,2,3,4,5,9 and S RESET Used to reset a Dav Zone Mini- must be held down for 2 seconds Sounder indication (MA-825HS only), a This will stop the green STATUS (until mini-sounder beeps) to per- lengthy door “chime”...
  • Page 6: The Alarm Output

    Your Magnum Alert-825/825HS Security System has three basic components: Zones 2. The Dlglt-Key Keypad 3. The Alarm Output Your system is capable of Lets you program arm/disarm When any zone is activated, the monitoring up to six separate areas codes; arm and disarm the system;...
  • Page 7 Selecting Your Codes The Digit-Key Keypad need, and change them as often as you feel necessary (refer to To program these codes, slide All security system operations are Changing or Voiding a Code). the ARM-DISARM/RUN/LOAD carried out at the keypad. Each key switch (upper left corner of the hasaspecialfunction of its own (see Control Center, see page 4) to the...
  • Page 8: Checking Ac Power

    Checking AC Power Sounder will warn you that exit- will flash once for Zone 1; pause; delay time has expired and entry- then flash three times for Zone 3. If the three lights of your keypad delay time has started. To avoid Try to clear the troubled zone(s) are blinking slowly, you have lost causing an alarm, quickly return...
  • Page 9 Ambush Code (optlonal) NOTE: If you enter the wrong code, If trouble is encountered on a you must wait at least 2 seconds zone programmed as a Priority- If an intruder forces you to disarm before re-entering. If there was an with-Bypass Zone however, enter your system, enter your prepro- extended power failure and your...
  • Page 10 Panic Zone Arming Wlth Selective disarm code to arm your remaining Zone Shunting zones. The green light will go OFF, To activate the panic zone, and the red ARMED/MEMORY light simultaneously press the two keys Your alarm specialist may have will come ON.
  • Page 11 Your Alarm Specialist may have EMERGENCY SERVICES MONITORS YOUR programmed your security system (Police, Medical Etc) SYSTEM 24 HOURS to be monitored a central station. The built-in digital communicator can transmit emergency signals to the central station 24 hours a day. ALERT-825/825HS COMMUNICATOR PREMISES...
  • Page 12: Abort Delay

    Abort Delay Opening and Closing Central Station Rlngback Reporting Note which zones on your alarm The central station will acknowl- plan have abort delay. This is a edge the fact that you have armed An optional feature that permits delay that enables you to reset the your system by “ringing back”...
  • Page 13 Fire-Detector Reset The following information is general power outage. If there is, applicable only where local you will be operating from your After a fire alarm, the red FIRE ordinance permits use of your alarm standby battery. When AC power is ALARM light will be on.
  • Page 14: Read Carefully

    Even with the most advanced fire alarm system, adequate protection requires an escape plan. To pre- pare your plan: Draw floorplans of your building. Show two exits - a front or back door window from and a each room. (Make sure the window works.
  • Page 15 Contacts Zone Features Area Protected Zone (doom, wlndows, etc.) Central Station Telephone (Optional) Service Person Telephone Technical Manuals Online! - http://www.tech-man.com...

This manual is also suitable for:

Magnum alert-825hs

Table of Contents