Service Overview; Checking Before Installation; Checking The Rom And Software Version - Sony HDC1000 Maintenance Manual

1-1. Checking before Installation

1-1-1. Checking the ROM and Software Version

When connecting the peripheral equipment in the list below to HDC1000/1400/
1500/1550/1580, be sure to check that the ROM and software version on each
peripheral device is corresponding to the camera to be connected.
If the ROM and software version is lower than the specified below, be sure to
perform ROM replacement and updating the software.
If ROM replacement and updating the software are required, contact your local Sony
Sales Office/Service Center.
ROM
Peripheral equipment Board name
MSU-700A/750 CPU-293/CPU-286
CNU-700 AT-89 or AT-89A
CNU-500 AT-100
RCP-720/721 MPU-79
RCP-730/731 MPU-79
RCP-740/741 MPU-79
RCP-700/701 MPU-92
RM-B150 CPU-266
HDCU-900 AT-141
Software
Peripheral equipment Board name
RCP-750/751 MPU-123
RM-B750 MPU-124
HDCU1000 AT-141
HDCU1500 AT-149
MSU-900 CPU-396
HDCU-950 AT-149
HDC1000/V1(E)
Section 1

Service Overview

Ref No. Rom version
IC5, IC6/IC5, IC6 Ver. 1.30 or higher
IC4, IC5 Ver. 3.20 or higher
IC4, IC5 Ver. 2.80 or higher
IC10 Ver. 2.90 or higher
IC10 Ver. 2.90 or higher
IC10 Ver. 2.90 or higher
IC6 Ver. 2.90 or higher
IC4 Ver. 1.00 or higher
IC105, IC106 Ver. 1.40 or higher
Software version
Ver. 1.21 or higher
Ver. 1.00 or higher
Ver. 1.21 or higher
Ver. 1.00 or higher
Ver. 1.02 or higher
Ver. 1.11 or higher
1-1