Automatic Adjustment; Electrical Alignment; Clamp Level Adjustment Between Channel A And Channel B - Sony HDC1000 Maintenance Manual

3-2. Automatic Adjustment

To execute the automatic adjustment
1. MSU menu operation:
. MAINTENANCE button → ON (lit)
. Touch panel operation
[Auto|Setup] → [Auto|Level]
n
When performing automatic adjustment using the
menu of the camera, set the setup menu as follows.
MENU: MAINTENANCE
PAGE: AUTO SETUP
ITEM: AUTO LEVEL
2. When the adjustment is completed, the message
"Completed" will be displayed.
3-8

3-3. Electrical Alignment

3-3-1. Clamp Level Adjustment between
Channel A and Channel B
Preparations
. Menu setting
MENU : SERVICE
PAGE : OHB_ADJ1
Adjustment Procedure
1. Adjustment Item:
MENU: SERVICE
PAGE: OHB-ADJ1
ITEM: DC_ADJ_A [R1], [G1], [B1]
DC_ADJ_B [R1], [G1], [B1]
DC_ADJ_A [R2], [G2], [B2]
Specification:
For 1080_59.94i/50i/29.97PsF/25 PsF/
23.58 PsF, set "DC_ADJ_A [R1], [G1],
[B1]" and "DC_ADJ_B [R1], [G1], [B1]"
to 68.
For 1080_59.94P/50P, set "DC_ADJ_A
[R1], [G1], [B1]" and "DC_ADJ_A [R2],
[G2], [B2]" to 68. (This item is fine
adjusted during the RPN adjustment
described later.)
2. Execute file storing for each format.
MENU: SERVICE
PAGE: OHB-ADJ1
ITEM: STORE FILE
HDC1000/V1(E)