Sony HDC1000 Maintenance Manual page 86

Adjustment Procedure
1. Adjust the white balance.
WHITE button/MSU-900 → ON (lit)
2. If the shading is monitored, proceed as follows.
MSU menu operation:
. MAINTENANCE button → ON (lit)
. Touch panel operation
[Adjusting] → [White|Shading] → [R]
. Adjustment Items: H Saw, H Para, V Saw, V Para
(H SAW)
(V SAW)
3. Adjust for G-ch in the same manner.
4. Adjust for B-ch in the same manner.
5. Adjust the white balance.
WHITE button/MSU-900 → ON (lit)
OHB File Store
MSU menu operation:
. FILE button → ON (lit)
. Touch panel operation
[OHB|File] → [OHB|Store] → [Store]
3-12
(H PARA)
(V PARA)
Adjustment for Lens Extender/Shrinker
When the WHITE or shading of V is out of alignment by
using the lens extender or lens shrinker, perform the
following adjustment (lens adjustment) after the comple-
tion of OHB file store.
6. Adjust the white balance.
WHITE button/MSU-900 → ON (lit)
7. (In the status of lens: x1) Perform the lens file store.
MSU menu operation:
. FILE button → ON (lit)
. Touch panel operation
[Lens|File] → [Lens|Store] → [Store]
8. Lens extender (x2) → ON
or lens shrinker (x0.8) → ON
9. Adjust the white balance.
WHITE button/MSU-900 → ON (lit)
10. MSU menu operation:
. MAINTENANCE button → ON (lit)
. Touch panel operation
[Lens|Adjusting] → [V|Mod|Saw]
Adjustment Item: R, G, B
Specification: Set the V modulation correction
value as required.
11. Perform the lens file store.
MSU menu operation:
. FILE button → ON (lit)
. Touch panel operation
[Lens|File] → [Lens|Store] → [Store]
12. Lens extender (x2) → OFF
or lens shrinker (x0.8) → OFF
HDC1000/V1(E)