Writing And Rewriting The Pld Internal Data - Sony HDC1000 Maintenance Manual

1-14. Writing and Rewriting the PLD
Internal Data
This unit uses the PLD (Programmable Logic Device) that
supports the e-Production (EPR) system to write and
rewrite the internal data.
If the part listed below needs to be replaced or to be
upgraded, contact your local Sony Sales Office/Service
Center.
n
The part number of PLD (or ROM for PLD) in which data
is not written yet, is shown in "Section 1. Spare Parts" of
Maintenance Manual Volume 2.
Therefore, if part replacement is required, write the data by
the following procedure.
In the case of the PLD type that runs on the program stored
in external ROM, data needs not to be written only by
replacing the part if the specific PLD only is defective.
e-Production system has the advantages shown
below.
. To write/rewrite the PLD internal data:
1. The standard fixture (cable) can be used.
2. The standard software (PLD Download Tool) can be
used.
. The PLD internal data is controlled in the Sony Database
Server under the name of Project file
(E_xxx_xxx_xx_xx).
. The printed circuit board is equipped with the standard
connector (EPR connector) to write the PLD internal
data. The indication "EPR" is shown on the printed
circuit board.
HDC1000/V1(E)
Corresponding PLD
PLD EPR connector
(Ref No./board name) (Ref No./board name)
IC404/AT-163 CN401/AT-163
*1
IC403/AT-163
IC201/DAP-33 CN2/DAP-33
IC202/DAP-33 *2
IC408/SDI-84/84C CN202/SDI-84/84C
IC212/SDI-84/84C *3
(HDC1000/1400/1500)
IC9/TG-243/243B/243C CN2/TG-243/243B/
*4
IC6/TG-243/243B/243C 243C
IC501/TR-136 CN3/TR-136
IC504/TR-136 *5
(HDC1550)
IC110/VDA-63 CN100/VDA-63
*6
IC109/VDA-63
*1: IC403/AT-163 is the ROM for IC404/AT-163.
*2: IC202/DAP-33 is the ROM for IC201/DAP-33.
*3: IC212/SDI-84/84C is the ROM for IC408/SDI-84/84C.
*4: IC6/TG-243/243B/243C is the ROM for IC9/TG-243/243B/243C.
*5: IC504/TR-136 is the ROM for IC501/TR-136.
*6: IC109/VDA-63 is the ROM for IC110/VDA-63.
*7: The file name changes when upgrading.
n
For checking the SDI-84 board, refer to Section 2-14.
Equipment required
. PLD download fixture
(Sony part number: J-7120-140-A)
The cable to connect PC to this unit.
. PC
A PC having parallel port.
A PC in which the PLD Download Tool software is
already installed.
For the applicable OS and the operating environment,
refer to "Download Tool Operating Instruction for
Device Programming".
Project file No.
*7 E_000_001_88_xx
*7
E_000_001_89_xx
*7
E_000_001_91_xx
*7
E_000_001_87_17
*7
E_000_003_01_xx
*7
E_000_001_90_xx
1-31