Network Settings - American Dynamics Illustra Flex Series User Manual

3.2.3 Network Settings

3.2.3.1 Basic Settings

Camera Name: Enter a name for the unit or simply use the default name.

DHCP: The IP address is automatically obtained when "ON" selected; otherwise, select "OFF" to
manually setup the network setting.

IP Address: Manually input IP address when DHCP off selected.

Subnet Mask: Please use default address: 255.255.255.0. If subnet mask is not properly configured, the
unit may not be able to communicate with other devices.

Default Gateway: Leave blank as default setting. No Default Gateway address required if not used. Ask
your network administrator for further information.

Primary DNS: same as above.

Secondary DNS: same as above.

HTTP Port Number: It is recommended to use the default port number. Please contact your network
administrator if you need to change it. The legitimate port number other than 80 is ranging from 1025 to
65535.

UPnP: When set to "ON", the unit can be detected automatically by any computer in the LAN to skip the
installation of Illustra Connect.
Please click "Save" button to save your settings. Users can click "Reset" to return last setting
Note
and also click "Default" to set all the data and options back to defaults.
F 3-30: N
IGURE ETWORK
37
Illustra Flex Series 1MP Wireless Cube
B S
ASIC ETTINGS