When "WPA-Personal" is selected in "Security", "TKIP" or "AES" will be displayed in "Encryption", and "Key"
shows automatically. The default is TKIP.
When "WPA2-Personal" is selected in "Security", "TKIP" or "AES" will be displayed in "Encryption", and "Key"
shows automatically. The default is TKIP.
The Encryption key must be the same value used by the wireless access point (AP).
Note
Please click "Save" button to save your settings. Users can click "Reset" to return last
setting and also click "Default" to set all the data and options back to defaults.
WPS – Settings
Wi-Fi Protected Setup (WPS) is a computing standard that attempts to allow easy establishment of a secure
wireless home network. WPS supports two connection ways. One is PIN Code and the other one is
PBC(Push Button correction) .
PIN code:
1.
Remember IP camera pin code(99956042) and simultaneously Key-in 8 digitals pin code to
AP device
2.
Click "Start PIN code" between AP and IP camera
3.
Then WPS will be connecting.
Button to set:
1.
Push "WPS" button on AP device and simultaneously push "default" button on IP camera at
2sec
2.
Or Push "WPS" button on AP device and push "Start PBC" button on IP camera by UI
configuration
3.
Then WPS will be connecting.
F
3-38: WIFI S
IGURE
ECURITY
F
3-39: WIFI S
IGURE
ECURITY
F
3-40: WIFI S
IGURE
ECURITY
43
Illustra Flex Series 1MP Wireless Cube
S
ETTING
S
ETTING
S
ETTING