American Dynamics Illustra Flex Series User Manual page 31

Function Choice
Image Mode M - J P E G / H . 2 6 4
720P/VGA/
Resolution
CIF/QVGA
PAL:5/10/12/25
Frame Rate
NTSC:5/10/15/30
Variable bit rate/
Bit Rate control
mode Constant bit rate
Compression
Low/Mid/High
Ratio
512K/1M/2M/4M/
Bit Rate
6M/8M
2-64
GOP
T 3-2: S Q
ABLE TREAM UALITY
Remark
Set a default compression mode.
720P is the highest resolution and, QVGA is the lowest
resolution.
The frame rate is displayed per second.
PAL: H.264/M-JPEG: 720P, CIF, VGA, QVGA@25fps
NTSC: H.264/M-JPEG: 720P, CIF, VGA, QVGA@30fps
Choose the Bit Rate control selection based on user
requirements. When chosen Variable bit rate, max and min bit
rate values can be set.
Low: this setting produces highest image quality while the file
size increases.
High: this setting produces lowest image quality while the file
size decreases.
Note: When M-JPEG selected, it will display Compression Ratio
as users set according to requirements.
It's optional only when constant bit rate is chosen. Select the
desired bit rate among 512K, 1M, 2M, 4M, 6M,and 8M kb/s.
Select the GOP (Group of pictures) number from 2 to 64. If the
number is bigger, recovery of the lost frames will be more
difficult; if the number is smaller, it will increase the bite rate
obviously and aggravate the network load. The default value is
30, and GOP will be differed by fps setting.
31
Illustra Flex Series 1MP Wireless Cube
S
ETTINGS