Figure 43. Carriage Wheel Replacement; Carriage Wheel Replacement - Ioline FJ Printer Service Manual

74 Ioline FJ Printer & StudioJet Service Manual

Carriage Wheel Replacement

1. Follow carriage replacement procedure (Steps 1, 2, 3, 4, 5 & 6
only).
2. Locate the wheels (Figure 43, photo 1) and unscrew the wheel
stud nuts on back of carriage (Figure 43, photo 2).
3. Remove the wheels (Figure 43, photo 3).
4. Install new wheels on the studs (Figure 43, photo 3).
5. Install the wheel stud nuts—not too tight, the wheels should
move freely (Figure 43, photo 1).
6. Install the carriage by following the carriage replacement pro-
cedure (Steps 9–15) listed earlier in this chapter.
7. Move the carriage back and forth by hand to test.
8. If it works properly, re-install the left side cover.
9. If problems arise, contact Ioline Tech Support.
Photo 1
Photo 3

Figure 43. Carriage wheel replacement.

Photo 2
Photo 4