Control Center Software Errors - Ioline FJ Printer Service Manual

38 Ioline FJ Printer & StudioJet Service Manual

Control Center software errors

The FJ Printer did not respond. Do you wish to continue anyway?
The Control Center did not get a response from a FJ Printer on the COM
port it is currently confi gured to use. If the FJ Printer is connected and the
power is on, click 'Yes'. Follow the directions in the FJ Printer User Guide for
confi guring the COM port and baud rate.
Unable to open communication port. You may need to select a differ-
ent COM port. Do you wish to continue?
The Control Center did not get a response from a FJ Printer on the COM
port it is currently confi gured to use. If the FJ Printer is connected and the
power is on, click 'Yes'. Follow the directions in the FJ Printer User Guide for
confi guring the COM port and baud rate.
Incorrect plotter model. Do you wish to continue?
The Control Center did not recognize the printer model connected to the
COM port. Upgrade the Control Center to the latest version. If that does
not resolve the problem, confi rm that 'FJ Printer Control Center' is displayed in
the menu bar of the program. If it is not, obtain the correct version from Ioline.
Fatal Error: COM port pointer is NULL Unable to recover.
A serious internal failure in the program or Windows has occurred. Close all
®
programs, restart Windows then start the Control Center program.
®
Unable to change FJ Printer baud rate Do you wish to change baud
rate in Control Center?
The Control Center did not get a response from a FJ Printer on the COM
port it is currently confi gured to use. If the FJ Printer is connected and the
power is on, click 'Yes'. Follow the directions in the FJ Printer User Guide for
confi guring the COM port and baud rate.
Warning: Unable to open log fi le; Status messages will not be saved.
This error occurrs if the Control Center is unable to write the fi rmware up-
grade process log in the same folder where the fi rmware source fi le is stored
on the PC. It is typical if installing fi rmware from a CD-ROM or if the user does
not have 'Modify' or 'Full' permissions to the PC fi le system. Copy the fi rmware
to the hard disk and make sure permissions are correct before installing.