The Control Center; Overview; Figure 12. Control Center Main Menu; Changing System Settings - Ioline FJ Printer Service Manual

The Control Center

Overview

The Control Center is a utility program that does two things:
Allows you to adjust settings to tailor output (e.g. scale, line

width) from the computer.
Provides an interface to send completed fi les to the printer.


Figure 12. Control Center main menu.

Changing system settings

A variety of settings are adjustable to fi t specifi c needs:
Make sure the printer power is on and that the initialization

process is complete. The carriage will park, the keypad OK
light will turn red and the Square light will turn green.
 The Screen Menu displays the primary settings that are adjust-
able. The Menu Bar contains utilities for setting up the Control
Center and calibrating the pinter.
 Changes only take effect after one of the Send buttons is
pushed.
Chapter 1: Overview
 
Note
To avoid communication port
confl icts, do not simultaneously
run more than one application
that communicates with the
printer.
29