Setting A Wireless Lan Using The Scansnap Wireless Setup Tool - Fujitsu ScanSnap iX100 Basic Operation Manual

Setting a Wireless LAN Using the ScanSnap Wireless Setup Tool

The ScanSnap Wireless Setup Tool is an application to configure the wireless settings required for
connecting your ScanSnap via wireless LAN in a wizard format. The ScanSnap Wireless Setup Tool
can be used to configure and check the following wireless LAN settings and connection.
l Connecting the ScanSnap to a wireless access point
l Registering the computer that will be connected to the ScanSnap via wireless LAN
l Setting the IP address, name, and password for the ScanSnap
l Checking the connection between the ScanSnap and the computer
l Checking the connection between the ScanSnap and the mobile device
Follow the procedure below to start the ScanSnap Wireless Setup Tool and configure the wireless
settings.
1.
Select [Start] menu → [All Programs] → [ScanSnap Manager] → [ScanSnap
Wireless Setup Tool] (for Windows 8.1 or Windows 8, select [ScanSnap
Manager] → [ScanSnap Wireless Setup Tool] on the All apps screen).
a The ScanSnap Wireless Setup Tool will start running.
2.
Click the [Wireless Network Setup Wizard] button
menu.
a The Wireless Network Setup Wizard appears.
3.
Follow the instructions in the Wireless Network Setup Wizard to configure
the wireless settings.
Configure and check the wireless settings based on the wireless LAN environment in which the
ScanSnap is used.
HINT
l For details and operation of ScanSnap Wireless Setup Tool, refer to the ScanSnap Wireless Setup
Tool Help.
l The ScanSnap Wireless Setup Tool is also started up when the ScanSnap software is installed.
Connecting the ScanSnap via Wireless LAN
57
in the main