Charging The Battery - Fujitsu ScanSnap iX100 Basic Operation Manual

Charging the Battery

The battery of the ScanSnap can be charged by connecting the ScanSnap and the computer with
the supplied USB cable.
Charge the ScanSnap's battery in the following procedure.
ATTENTION
If you use the ScanSnap while charging the battery, the following conditions may occur:
l It takes time until charging completes.
l Charging does not complete.
l The ScanSnap turns off automatically.
1.
Connect the USB cable to the USB connector on the ScanSnap and the USB
port on the computer.
a The battery indicator lights up in orange.
When charging completes, the battery indicator turns off.
HINT
You can use the optional USB power adapter to charge the battery in a shorter time.
39
Charging the Battery