Fujitsu ScanSnap iX100 Basic Operation Manual page 95

a The installation information is removed, and the following message appears.
3. Click the [OK] button to close the [Remove Installation Information] window.
6.
By repeating step 5, remove the installation information of all the software
listed in the [Remove Installation Information] window.
7.
Click the [Close] button to close the [Remove Installation Information]
window.
8.
Confirm that the installation folder no longer exists.
If the [ScanSnap] folder remains in the following location, rename the folder (such as [-
ScanSnap]). This folder can later be deleted once the installation is successfully completed.
Path: DriveName (such as C):\Program Files\PFU
After completing the procedure, proceed to
96).
"Installing the Software from the [ScanSnap Setup] Window" (page
95
If You Have Installed the Software Before