System Requirements - Fujitsu ScanSnap iX100 Basic Operation Manual

System Requirements

The ScanSnap has the following system requirements.
For the latest information on requirements, please visit the ScanSnap Support Site at:
http://scansnap.fujitsu.com/g-support/en/
Operating system
CPU
Memory
Display resolution (*3)
Disk space
USB port
*1: The software bundled with the ScanSnap operates as a desktop application.
*2: Service Pack 2 or later is required.
*3: When the font size is large, some screens may not be displayed correctly.
In such a case, use a smaller font size.
*4: To save scanned images, more free space is required.
For details about estimated image data size, refer to the ScanSnap Manager Help.
*5: When the ScanSnap is connected to a USB 3.0 port, the port operates as a USB 2.0 port.
ATTENTION
l If the system requirements above are not satisfied, the ScanSnap may not operate.
l If a USB port on the keyboard or on the monitor is in use, the ScanSnap may not operate.
l When using a commercially available USB hub, use a type that is powered from an electrical power
supply (and that comes with an adapter).
l Scanning speed decreases in the following cases:
- The CPU or the memory does not meet the recommended specifications.
- The version of the USB port or the USB hub is USB 1.1.
l The actual disk space used for the installation of the software and the disk space required for the
installation may be different because of the disk management in your Windows system.
l To scan a document, a disk space that is approximately three times larger than the size of the file
to be saved is required.
Windows 8.1 (32-bit/64-bit) (*1)
Windows 8 (32-bit/64-bit) (*1)
Windows 7 (32-bit/64-bit)
Windows Vista (32-bit/64-bit) (*2)
®
™
Intel Core i5 2.5 GHz or higher
4 GB or more
Windows 8.1/Windows 8: 1024 × 768 pixels or higher
Windows 7/Windows Vista: 800 × 600 pixels or higher
Free space required to install the software related to the ScanSnap is as follows:
(*4)
l ScanSnap Manager: 700 MB
l ScanSnap Organizer: 670 MB
l CardMinder: 660 MB
l ABBYY FineReader for ScanSnap: 620 MB
l ScanSnap Online Update: 10 MB
l Scan to Microsoft SharePoint: 40 MB
l ScanSnap iX100 Basic Operation Guide: 200 MB
USB3.0 (*5)/USB2.0/USB1.1
40
System Requirements