Setting A Wireless Lan Using The Scansnap Wireless Setup Tool - Fujitsu ScanSnap IX500 Operating Instructions Manual

Setting a Wireless LAN Using the ScanSnap Wireless Setup Tool

The ScanSnap Wireless Setup Tool is an application to configure the wireless settings required for
connecting your ScanSnap via wireless LAN in a wizard format. The ScanSnap Wireless Setup Tool
can be used to configure and check the following wireless LAN settings and connection.
l Connecting the ScanSnap to a wireless access point
l Registering the computer that will be connected to the ScanSnap via wireless LAN
l Setting the IP address, name, and password for the ScanSnap
l Checking the connection between the ScanSnap and the mobile device
Follow the procedure below to start the ScanSnap Wireless Setup Tool and configure the wireless
settings.
1.
Start the ScanSnap Wireless Setup Tool.
l Windows 10
Select [Start] menu → [All apps] → [ScanSnap Manager] → [ScanSnap Wireless Setup
Tool].
l Windows 8.1
Click on the lower left side of the Start screen, and select [ScanSnap Wireless Setup
Tool] under [ScanSnap Manager] on the All apps screen.
l Windows 8
Right-click the Start screen, and select [All apps] on the app bar → [ScanSnap Wireless
Setup Tool] under [ScanSnap Manager].
l Windows 7/Windows Vista/Windows XP
Select [Start] menu → [All Programs] → [ScanSnap Manager] → [ScanSnap Wireless
Setup Tool].
a The ScanSnap Wireless Setup Tool will start running.
2.
Click the [Wireless Network Setup Wizard] button
menu.
a The Wireless Network Setup Wizard appears.
3.
Follow the instructions in the Wireless Network Setup Wizard to configure
the wireless settings.
HINT
l For details and operation of ScanSnap Wireless Setup Tool, refer to the ScanSnap Wireless Setup
Tool Help.
l The ScanSnap Wireless Setup Tool is also started up when the ScanSnap software is installed.
Connecting the ScanSnap via Wireless LAN
54
in the main