Staple Papers ([Staple]); Punching The Printed Sheets ([Punch]) - Olivetti d-COLOR MF652 Operation Manual

6 Binding Copied Paper

Staple papers ([Staple])

Each set of copied sheets is stapled (in a corner or two positions) before it is output. This function is useful
for preparing a project proposal or other booklet materials.
For details, refer to page 15-10.
Tips
- The optional Finisher is required to use the Staple function.

Punching the printed sheets ([Punch])

Copied sheets are punched for filing before they are output. This function is useful when you want to bind
printed materials in files.
For details, refer to page 15-10.
Tips
- To use the punch function, install the Punch Kit PK-521 or Z Folding Unit in the optional Finisher FS-
535, or install Punch Kit PK-520 in the Finisher FS-534.
d-Color MF752/652
6
6-3