Starting Os Installation - Fujitsu 1PRIMERGY RX600 S4 User Manual

Chapter 3 OS Installation

3.2.5 Starting OS Installation

Install the operating system to the server.
Notes on the installation
When the installation partition is not empty, a confirmation message appears. Unless otherwise
considered as a problem, click [OK] to continue the installation procedure.
If an incorrect setting (such as the CD key) is found during installation, an error window will appear.
Enter the correct values in the window to continue the installation procedure. However, corrections
made here are not reflected on the configuration file.
1
Click [Click here, to Start the Installation of (OS)].
A confirmation window asking whether you want to save the current settings appears.
2
Click [Yes].
The following window appears.
3
Enter the file name, and click [Save As].
Installation starts automatically.
When a message prompts you to insert Array Controller Document & Tool CD
Insert the Array Controller Document & Tool CD, and click [OK].
When a message prompts you to insert Service Pack CD-ROM
Insert the Service Pack CD-ROM, and click [OK].
70