Security Against Unauthorized Use - Fujitsu 1PRIMERGY RX600 S4 User Manual

8.4.2 Security against Unauthorized Use

A password can be set to prevent unauthorized use of the server. Setting a password makes it necessary
to enter the password in order to access the server. Without the password, the server cannot be used.
Password types
There are two types of passwords that define the privileges of server operations.
User password (User password)
This password is required to use the server. Unless the set password is entered, part of the BIOS setup
cannot be accessed and the OS cannot be booted.
Administrator password (Supervisor password)
This is the password that only allows the administrator to set up this server. Unless the set password is
entered, the BIOS setup cannot be accessed and the OS cannot be booted.
Setting a password
The password is set in BIOS Setup Utility. For details on BIOS Setup Utility, refer to "7.2.11 Security
Menu" ( pg.169).
1
Start up BIOS Setup Utility.
"7.2.1 Starting and Exiting BIOS Setup Utility" (pg.157)
2
Select the [Security] menu, and select the type of password to be set.
• For the administrator password, select [Set Supervisor Password], and press the [Enter] key.
• For the user password, select [Set User Password], and press the [Enter] key.
3
When the password entry window appears, enter the password to be set.
Set User(Supervisor) Password:
Enter New Password
Confirm New Password
4
Enter the password again to confirm it.
5
Press the [Enter] key.
The password is set.
Enter the password
[ ]
Enter the password again for confirmation
[ ]
PRIMERGY RX600 S4 User's Guide
207