Table of Contents
Advertisement
BASIC SPECIFICATIONS
(15)
Multiple copies recording .............................. No
(16)
Bypass print ................................................. Possible to use as an active tray in auto selection
(17)
Total page counter........................................ Compliant to the copier standards
(18)
Monitor print ................................................. No
(copy at sending)
1.1.4
Line Connecting Section
(1)
NCU type .................................................... A-A~ and built-in NCU
(2)
Connecting terminal ..................................... RJ11
(3)
Modem ........................................................ Matsushita MMD-H5005
(4)
Modem sending level ................................... -10~-15 dBm (Country spec)
(5)
DTMF sending level ..................................... -10~-15 dBm (Country spec)
(6)
Receiving sensitivity ..................................... G3 reception: up to -48dB
(7)
Dialing signal ............................................... DP (10pps) and DTMF
1.1.5
Operation Panel
(1)
FAX / Copy / Scanner / Box
Mode switching ........................................... by panel key selection
Initial Screen after power-on ......................... Screen at power off or facsimile screen.
(2)
Interruption during scanning ........................ When pressing the interrupt button while scanning
(3)
Interruption during
recording in the FAX mode screen ............... Operations by using the interrupt button are invalid.
(4)
FAX start ...................................................... by using the start button.
(5)
Stop ............................................................ by using the stop button.
(6)
FAX free memory display ............................. RDH Memory
(7)
File existence indication ............................... By data LED
1-4
FK-502 Service Manual Ver.1.0
mode.
Tone reception: up to -52dB
•
Possible to change modes during an operation of
each mode.
•
No mode return by the auto reset.
(depending on parameter setting)
documents to be transmitted, INTERRUPT LED blinks.
Copy screen appears after scanning is completed.
•
Possible to appoint to stop from the job list so as
to stop during operations of the multi jobs.
•
% indication on LCD during scanning, recording
and stand-by.
File Memory (HDD)
•
Display in the JOB LIST screen
Hide quick links:
Advertisement
Table of Contents
