Lan Settings - Gigaset DE410 IP Pro User Manual

Configuring settings for the local network

LAN settings

You start network configuration via the display menu:
‰
¢ ¢
Settings
Please note:
To get access to network configuration you need to enter the administrator password. The
default setting is admin.
Selecting the network type
Network Type
IPv4
IPv6
Back
You may be asked to configure additional settings depending on your selection.
IPv4 configuration
§§Back§§
Press the display key to return to the Local Network menu from where you select
the next network configuration step.
IPv4 configuration
IP Address Type
Static
Dynamic
Back
§§Select§§
Press the display key to confirm the selection.
66
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
Local Network
Select
¢
below, IPv6 configuration
Select
q
Select Network Type.
§§OK§§
Press the display key to confirm the
q
selection.
Select the IP protocol that is used in
your network (IPv4 or IPv6).
§§Select§§
Press the display key to confirm the
selection.
£
page 68
q
Select IP Address Type.
§§OK§§
Press the display key to confirm the selec-
q
tion.
Select Dynamic if your device receives the
IP address via a DHCP server. Select Static
if your device receives a fixed IP address.