Gigaset DE410 IP Pro User Manual page 67

Hide thumbs Also See for DE410 IP Pro:
Table of Contents

Advertisement

If the Dynamic setting is selected, all further settings are automatically configured. They are
displayed and cannot be changed.
Local Network
IP Address
Subnet Mask
Standard Gateway
Back
IP Address
Enter an IP address for your phone. This IP address allows your phone to be reached by
other subscribers in your local network (e.g., PC).
The IP address comprises four individual groups of numbers with decimal values from 0 to
255 that are separated by a dot, e.g., 192.168.2.1.
Please note:
– The IP address must be included in the address block used by the router for the local
network. The valid address block is defined by the router's IP address and the subnet
mask (see example).
– The IP address must be unique in the local network, which means that it must not be
used by another device connected to the router.
– The static IP address must not belong to the address block that is reserved for the
router's DHCP server.
Check the settings on the router or ask your network administrator.
Example:
Router IP address:
Network subnet mask
DHCP server address block
Possible IP addresses for the phone
Subnet Mask:
The subnet mask specifies how many parts of an IP address the network prefix must com-
prise.
For example, 255.255.255.0 means that the first three parts of the IP address must be the
same for all devices in the network, while the last part is specific to each device. In subnet
mask 255.255.0.0, only the first two parts are reserved for the network prefix. Enter the
subnet mask that is used by your network.
Standard Gateway
Enter the IP address for the standard gateway through which the local network is con-
nected to the Internet. This is generally the local (private) IP address for your router (e.g.,
192.168.2.1). Your phone requires this information to be able to access the Internet.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
Configuring settings for the local network
If you have selected Static as the address type,
you must now create the following settings:
– IP Address
– Subnet Mask
– Standard Gateway
OK
– Pref. DNS Server and
– Altern. DNS Server
192.168.2.1
255.255.255.0
192.168.2.101 – 192.168.2.255
192.168.2.2 – 192.168.2.100
67

Advertisement

Table of Contents
loading

Table of Contents