Establishing A Connection To The Local Network - Gigaset DE410 IP Pro User Manual

Hide thumbs Also See for DE410 IP Pro:
Table of Contents

Advertisement

First steps
Select Time Zone
(GMT) GMT, Dublin, Lon-
(GMT+01:00) Amster-
(GMT+02:00) Athens,
When you have made your selection, press the end key
You can correct your selection if necessary.
Please note
The date and time are automatically set by a time server. You can select a time server using
the Web configurator or deactivate this function (

Establishing a connection to the local network

Your phone must be connected to the local network before it can connect to the Internet and
before you can operate it from a PC.
The device checks to see if a network connection already exists. The network connection is
automatically established if the phone has automatically been assigned an IP address from a
DHCP server in the network. If this is the case, the following screen will not appear and you
£
can skip to
page
Please note
The following network configuration is the default setting on your device: LAN with IP pro-
tocol version 4 (IPv4) and DHCP.
If your phone has no network connection, you will need to configure the network manually.
Depending on the type of network, you will need the following information about the con-
figuration:
u
If the network uses IP protocol version 4 (IPv4) with a static IP address, you will need:
The device IP address, the network subnet mask, the IP addresses of the standard gateway
and DNS server.
u
If the network uses IP protocol version 6 (IPv6):
IP addresses automatically: select IPv6 as Network Type. The connection is then estab-
lished automatically.
IP addresses statically: the device IP address, the address prefix length and the DNS server
IP address.
If there is still no network connection, you will then be asked whether you wish to configure
the connection manually.
¤
§§Yes§§
Select
if you have the required information.
20
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
OK
21.
¤
Use the navigation key to select the
required time zone.
¤
Press the display key under
your selection.
¤
I
to return to the last entry screen.
£
page
110).
§OK§
to confirm

Advertisement

Table of Contents
loading

Table of Contents