Audio - Gigaset DE410 IP Pro User Manual

¤
Select Yes for Missed/accepted calls count if you want to deactivate this function. The
default setting is Yes.
Please note
If your telephone is connected to a Gigaset T500 PRO or Gigaset T300 PRO phone system,
calls are managed by the phone system rather than locally using the telephone and are
transferred to all phones assigned to it.
Allowing or blocking Call Waiting
If you receive another incoming call during a call, this is indicated by Call Waiting by default.
For each connection, it is possible to set whether or not Call Waiting is permitted.
¤
Open the Advanced Settings area.
¤
Select No for Call Waiting if you wish to deactivate this function. Default setting: Yes
Settings for the ringer
For each connection, you can define the ring tone.
¤
Open the Advanced Settings area.
¤
Select a Melody.
¤
Click on Test to play back the selected melody.
Saving settings
¤
Click on Save to save your settings for the connection.
Deleting a connection
¤
Click on Delete connection to delete the displayed connection.
Audio (Voice quality)
Only available in administrator mode.
The voice quality of your VoIP calls is determined by the codec used for the transmission. To
increase the quality, more data must be transmitted. Depending on the bandwidth of your
Internet connection, this can then lead to problems with the volume of data – especially if
two VoIP calls are made simultaneously – so that the transmission no longer takes place
smoothly. The following settings allow you to adjust your Gigaset to your individual Internet
connection.
¢
Settings Telephony
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
Configuring phone settings via the Web configurator
¢

Audio

93