Operating Door Interphones - Gigaset DE410 IP Pro User Manual

Operating door interphones

You can operate one or more door interphones using the phone.
Prerequisite: The door interphone must have been configured on the Web configurator or
the Gigaset phone system. You will need the the DTMF code of the door opener for configu-
ration.
u
Web configurator: use the following Web page for configuration
¢
Settings Services
u
Gigaset T500 IP PRO or T300 IP PRO phone system: the door interphone is setup during
phone configuration. If automatic configuration is permitted, configuration is carried out
automatically on your phone.
If someone rings the door interphone, this is displayed as an incoming call on the phone. In
addition, Door Interphone is displayed.
Door Interphone
Reject
Door Interphone
Open Door
Please note
u
If you are carrying out a telephone call at the same time, the ring at the door is signalled
by Call Waiting (
When the connection to the door interphone is ended, the previous connection is
restored. Toggling between calls is not possible.
u
An incoming call is signalled as a Call Waiting if you are already connected to the door
interphone. If you accept the call the connection to the door interphone is ended.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
¢
Door Interphone (
×
Silence
W
End
£
page 37). You can either reject the call or accept and open the door.
Operating door interphones
£
page 101).
Switching the ringer off
§§Silence§§
Press the display key to switch
off the ringer. You can then
decide whether or not to open
the door.
Ending the connection to the door
interphone
§§Reject§§
I Press the display key or end key
to reject the request.
c
Conduct a call over the door interphone
Pick up the receiver to talk with
the person at the door. Alterna-
tively you can conduct the call
using the speaker key
headset
§Open Door§§
Press the display key to operate
the door opener.
§§End§§
Press the display key to end the
call without opening the door.
A
B or the
.
57