Gigaset DE410 IP Pro User Manual page 14

First steps
Connecting the network cable
To make calls via VoIP, your phone must have Internet access. This connection is established
in the local network via a gateway.
You connect your phone to the same local network as the gateway. See the
in different scenarios
1
§§1§§
Attach one end of the Ethernet cable to the right-hand LAN port on the rear of the
phone.
§§2§§
Attach the other end of the Ethernet cable to a LAN port on your network Ether-
net switch or on the router itself.
Please exclusively use a shielded cable for the connection.
Warning
If you connect your Gigaset DE410 IP PRO to a PoE-capable Ethernet switch (PoE class
IEEE802.3af ), it will be supplied with power via PoE (Power over Ethernet). The PoE network
must not exceed the premises boundaries.
14
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
section on page 9 for an overview of the different options.
2
Using the phone