Gigaset DE410 IP Pro User Manual page 16

First steps
Connecting a device to the mains power supply (if required)
Your Gigaset DE410 IP PRO is supplied with sufficient power by PoE (Power over Ethernet) and
does not need to be connected to the mains power supply. Prerequisite: The device is con-
nected to an Ethernet switch with PoE functionality (PoE class IEEE802.3af ) (
To connect your device to the mains power supply, if required, a power adapter is supplied
with three different plug-in modules for Europe, Great Britain and the USA. First attach the
appropriate plug-in module to the power supply unit.
§§1§§
Slide the required plug-in module into the recess on the underside of the power supply
unit until it clicks into place.
§§2§§
To remove the plug-in module again, press on the button marked Push and pull the plug-
in module out of the power supply unit.
§§1§§
Connect the power adapter to the port on the rear of the phone.
§§2§§
Then insert the plug into the mains socket.
Warning
Use only the power adapter supplied.
Please note
You can safeguard your device against theft by fitting a Kensington lock. The corresponding
hole can be found on the rear of the device (
16
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
Europe
USA
Great Britain
1
2
§§3§§
).
£
page
1
3
14).
2