Lan Settings - Gigaset de310 ip pro Instruction Manual

LAN settings

You start network configuration via the display menu:
‰
¢
Settings
Please note:
To get access to network configuration you need to enter the administrator password.
The default setting is admin.
Selecting the network type
IPv4
Back
You may be asked to configure additional settings depending on your selection.
IPv4 configuration
§§Back§§
Press the display key to return to the Local Network menu from where you
select the next network configuration step.
IPv4 configuration
Static
Back
§§Select§§
Press the display key to confirm the selection.
If the Dynamic setting is selected, all further settings are automatically configured. They
are displayed and cannot be changed.
IP Address
Back
¢
Local Network
Select
¢
below, IPv6 configuration
Select
Select
Configuring settings for the local network
q
Select Network Type.
§§OK§§
Press the display key to confirm
q
the selection.
Select the IP protocol that is
used in your network (IPv4 or
IPv6).
§§Select§§
Press the display key to confirm
the selection.
£
page 61
q
Select IP Address Type.
§§OK§§
Press the display key to confirm the
q
selection.
Select Dynamic if your device receives
the IP address via a DHCP server.
Select Static if your device receives a
fixed IP address.
If you have selected Static as the address
type, you must now create the following set-
tings:
– IP Address
– Subnet Mask
– Standard Gateway
– Pref. DNS Server and
– Altern. DNS Server
59