Operating Door Interphones - Gigaset DE310 User Manual

Operating door interphones

Operating door interphones
You can operate one or more door interphones using the phone.
Prerequisite: The door interphone must have been configured on the Web configurator or
the Gigaset phone system. You will need the the DTMF code of the door opener for configu-
ration.
u
Web configurator: use the following Web page for configuration
¢
Settings Services
u
Gigaset T500 IP PRO or T300 IP PRO phone system: the door interphone is setup during
phone configuration. If automatic configuration is permitted, configuration is carried out
automatically on your phone.
If someone rings the door interphone, this is displayed as an incoming call on the phone. In
addition, Door Interphone is displayed.
×
Door Interphone
Reject
W
Door Interphone
Open Door
Please note
u
If you are carrying out a telephone call at the same time, the ring at the door is signalled
by Call Waiting (
When the connection to the door interphone is ended, the previous connection is
restored. Toggling between calls is not possible.
u
An incoming call is signalled as a Call Waiting if you are already connected to the door
interphone. If you accept the call the connection to the door interphone is ended.
54
¢
Door Interphone (
Silence
End
£
page 35). You can either reject the call or accept and open the door.
£
page 96).
Switching the ringer off
§§Silence§§
Press the display key to switch off the
ringer. You can then decide whether
or not to open the door.
Ending the connection to the door interphone
§§Reject§§
Press the display key or end key
to reject the request.
c
Conduct a call over the door interphone
Pick up the receiver to talk with the
person at the door. Alternatively you
can conduct the call using the
speaker key
§Open Door§§
Press the display key to operate the
door opener.
§§End§§
Press the display key to end the call
without opening the door.
A
or the headset
I
B
.