Modifying A Template - Honeywell XI581AH User Manual

ALPHABETIC REFERENCE
Access Level
Select Modify Template
Select Template
Select String
Position Cursor
Replace Character
EN2B-0126 (74-3554-8)
Purpose To modify an existing template in the template buffer.
You must have access level 2 or 3 to perform this task.
Procedure 1. From the Main Menu, use the arrow keys to move to and highlight Data Points.
Press Enter (↵) to complete the selection.
RESULT: The 'Data Points' screen displays.
Data Points
User Address
Manual Operation
Accumul. Runtime
Type Selection
Points in Trend
2. Use the arrow keys to move to and highlight Modify Template. Press Enter (↵)
to complete the selection.
RESULT: The 'Modify Template' screen shows a list of available templates.
Modify Template
3. Use the arrow keys to move to and highlight the template you want to modify.
Then press Enter (↵) to complete the selection.
RESULT: The 'Modify Template' screen displays the selected template.
Modify Template
Store Template
4. Press Enter.
RESULT: The first character in the string is now blinking.
5. Use the left and right arrows to position the cursor at the character where you
want to modify the string.
RESULT: The selected character is now blinking and can be edited.
6. Use the plus and minus keys to choose the character that you want to use to
replace the blinking character. Each time you press the plus/minus key, the
blinking character changes through a pattern of ?, *, a blank, and then back to
the original character.
Question mark
?
Asterisk *
XI581/2 BUSWIDE OPERATOR INTERFACE
Suppress Alarm
Add Template
Delete Template
Modify Template
Template Search
FLOOR7*
FLOOR1*
FLOOR1*
Match exactly one character of any type.
Match any number of characters until the next occurrence of a
character that must be matched exactly.
74

Modifying a Template

L L L L
I
1
I
M
Back