Level 2/3 Password Entry - Honeywell XI581AH User Manual

EVERYDAY OPERATIONS
Main Menu (Access Level 1)
Level 1 Operators
Level 2 & 3 Operators
Controller Power-on
Level-2 and -3 Operators
EN2B-0126 (74-3554-8)
Password
Time Programmes
Data Points
Level-1 operators do not have to enter a password.
Level-2 and level-3 operators must enter a password to perform level-2 and level-3
operations. See "Level 2/3 Password Entry" (page 16) for details.
The first display screen that appears after power-on is a message about the power
failure. Use the Cancel key (C) to acknowledge the message. The Main Menu
displays.
Procedures This section describes the following procedures:
• Level 2/3 password entry to enter a password if level-2 or level-3 functions are
required
• Loging into a remote controller to gain access to a controller that is not directly
connected to the XI581/2
• Logging off from a remote controller to disconnect from a remote controller that
you previously logged into
• Signing off from a controller (local or remote) to return to the level-1 Main Menu.
Purpose To sign on to an XI581/2 connected to a controller.
Procedure 1. After the XI581/2 is connected to a controller, the Main Menu automatically
appears in the display window unless the controller is reset and needs to be
downloaded. If the controller needs to be downloaded, the 'title/copyright' screen
displays.
NOTE:
RESULT: The Main Menu appears and lists information that level-1, -2, and -3
2. Level-2 and level-3 operators do not have to enter a password to perform a
level-1 task. However, to perform a level-2 or level-3 task, you must enter a
password using the 'Password' function. Press Enter (↵) to select the 'Password'
function.
NOTE:
RESULT: XI581/2 asks for your password. The display window shows four
Please enter your Password:
XI581/2 BUSWIDE OPERATOR INTERFACE
CONTROLLER_01
Running 15.12.1994
Alarms
Trend Buffer
System Clock
System Data
If the Main Menu does not appear, press Cancel (C) until it does.
operators can view. The word Password is highlighted as the default
selection.
If the 'Password' function is not highlighted, use the arrow keys to
move to and highlight the item and then press Enter (↵).
asterisks where you enter your password.
****
16
18:16!

Level 2/3 Password Entry