Honeywell XI581AH User Manual page 72

ALPHABETIC REFERENCE
Level 2 and 3 Operators
EN2B-0126 (74-3554-8)
CONTROLLER_07
Running
Password
Time Programmes
Data Points
2. Press Enter (↵) to select the 'Password' function.
NOTE: If the 'Password' function is not highlighted, use the up or down arrow
keys to move to and highlight this item and then press Enter (↵) to
complete selection.
RESULT: Software asks for your password. The display window shows four
asterisks to hide your password when you enter it.
Please enter your Password:
****
3. Press Enter (↵) to select the password field (four asterisks).
— The display window shows a 5 as the first, left-most digit of the password
field.
— If the first digit of your password is higher than 5, press the plus key (or the
up arrow key) until the first digit of your password is correct.
— If the first digit of your password is lower than 5, press the minus key (or the
down arrow key) until the first digit of your password is correct.
— Press the right arrow key to move the cursor to the second digit. Notice that
the first digit becomes an asterisk again to maintain password privacy.
Repeat this procedure until you have correctly entered all digits in the password
field.
NOTES:
1. The default password for level-2 operators is 2222 and the default password
for level-3 operators is 3333.
2. The password for level-3 operators corresponds to the password for Excel
Live CARE. If you change the XI581/2 level-3 password, you will
automatically modify the password for Live CARE, too.
4. Press Enter (↵) to complete password entry.
RESULT: Next is highlighted at the bottom of the window.
Please enter your Password:
****
Change
5. Use the arrow keys to move to and highlight Change and then press Enter (↵).
RESULT: The display window lists the current passwords for level-2 and level-3
operator passwords.
68
XI581/2 BUSWIDE OPERATOR INTERFACE
18:16!
15.12.1994
Alarms
Trend Buffer
System Clock
System Data
NEXT