Honeywell XI581AH User Manual page 49

XI581/2 BUSWIDE OPERATOR INTERFACE
DIO Module Assignment
Address: 04
! XFL522
XFL522
* XFL522
Special characters indicate the module status according to the following key:
! An exclamation mark indicates that the module was previously assigned to this
controller in CARE but is now being used by another controller.
* An asterisk indicates that the module is being used by another controller. It is
displayed because module type and address match.
A blank indicates that this module is free and can be used for assignment.
8. Select a module by using the arrow keys to move to and highlight it and then
pressing Enter (↵).
RESULT: The assignment is accepted and the first 'Distributed I/O Module
Assignment' screen is displayed again.
DIO Module Assignment
02 ? XLF521
03
04 - XFL522
05 XFL524
A second method can also be used to select a module. While either the screen with
the Distributed I/O module types (result of step 6) or the screen with the found
Distributed I/O modules (result of step 7) is displayed, press the L
pin of the module being selected.
RESULT: If the L W
ON ORKS
displayed:
DIO Module Assignment
Module : 04 XFL522
Neuron ID: 0001FC234088
ASSIGN
9. ASSIGN is highlighted by default. Press Enter (↵) to accept the assignment or
press Cancel (C) to return to the previous screen.
RESULT: If the assignment is accepted, the first 'Distributed I/O Module
Assignment' screen is displayed again.
DIO Module Assignment
02 ? XLF521
03
04 - XFL522
05 XFL524
45
EVERYDAY OPERATIONS
L L L L
Unassign
0001FC234088 1
I
0001FC334056
M
0001FC234062
L L L L
0001FC234088
<Unassigned> 1
I I I I
0001FC234088
M
0001FC234062
service pin is pushed, the following screen is
L L L L
0001FC234088
<Unassigned> 1
I I I I
0001FC234088
M
0001FC234062
W service
ON ORKS
EN2B-0126 (74-3554-8)