Saeco Classic Service Manual page 81

ROYAL
Function
NORMAL TEMP.
°C 86/90
HIGH TEMP.
°C 92/98
TEMP. OF 1st
COFFEE
° C 94/100
STEAM TEMP.
°C 130/110
COFFEE TEMP.
INCREASE
°C 10/7
STEAM TEMP. INCR.
°C 15
STEAM
35
CAPPUCCINO
30
GRINDS COUNTER
Number
GRINDS STOP
30
TOTAL WATER....S1
(ml) Number
WATER DESCALING
S1
(ml)
Saeco International Group
Setting range Increment
70- 130°C
70- 130°C
70- 130°C
70- 135°C
0-50°C
0-50°C
20-50
20-50
0-50
5-50
REV.4 SEPT.2003
5. SERVICE PROGRAMME
Comments
+/- 1 Normal temperature is used if not
more than 6 min. have elapsed since
last coffee dispensed.
+/- 1 If no coffee is dispensed for an
extended time (over 6 min.), the next
coffee will be heated to a higher
temperature to compensate for
cooling of the brewing unit and the
associated temperature loss.
+/- 1 Used when dispensing the first
coffee after the machine has been
turned on, to compensate for the high
temperature loss due to the cold
brewing unit and water pipes.
+/-1
Steam temperature 110°C only in
Redesign machines under the item:
STEAM TEMP. INC.
(steam temperature increase)
+/-1 The boiler temperature is increased
by a set value shortly before brewing
in order to pre-heat the boiler. and
compensate for the temperature drop
during the first water flow.
+/-1 In Redesign models the constant
temperature of 110°C is increased by
15°C during steam dispensing.
+/-1 Pulsing of pump during steam
dispensing.
+/-1 Pulsing of pump during cappuccino
dispensing.
+/-1 Counts number of coffee cycles.
When this value reaches the Grinds
Stop value, "GRINDS CONTAINER
EMPTY" will be displayed. (Reset
by removing dregs drawer for
emptying - min. 6 sec.)
+/-1 Number of cycles until "EMPTY
GRINDS CONTAINER" is
displayed.
Pump system 1
Total water flow volume (in ml) / not
resettable
Pump system 1:
Total water flow (in ml) since last
descaling.
Reset: Press cappuccino button for 5
sec.
Redesign - Expresso lungo
+ESC
Page 11/24