Saeco Classic Service Manual page 31

ROYAL
Action
17 Hot water
Quantity programme
Cappuccino Maker (not in Royal Digital+)
18 Cappuccino
(only when cappuccino
maker programme is
deactivated in the user menu)
19 Cappuccino
Quantity programme
(only when cappuccino
maker programme is
activated in the user menu)
20 Cappuccino
Quantity programme
Note: The Steam and Cappuccino functions cannot be used parallel to the coffee programme in the
Royal Professional Rapid Steam, Royal Coffeebar and Royal Digital + systems.
Empty dregs drawer
Empty drip tray
Clean water tank.
Clean coffee bean
container.
Clean the housing.
Clean brewing unit and
grease filter.
Descale
1. Place Saeco descaler into fresh water tank.
Descale:
2. Fill with about one litre of hot water.
3. Remove about two to three cups via the brewing unit.
4. Activate the Descale item in the user menu by selecting OK and open the HWS valve
(place a sufficiently large container under the steam pipe). The descaler mixture is pumped
at intervals through the circuit.
5. Rinse: Fill the water tank once again and open the steam valve (about 2 cups via
brewing unit).
Reset: Under the descale indicator item Enter - YES - Enter.
Saeco International Group
Comments
The last programme saved is
activated by pressing the hot
water button briefly.
Press the cappuccino button
briefly to start cappuccino
dispensing; press again to stop.
Keep the cappuccino button
pressed for the desired time.
The last programme entered is
saved
The last programme saved is
activated by pressing the
Cappuccino button briefly.
Cleaning
Storage capacity of 30 tablespoons (dreg counter reset only if warning to
empty grounds container is triggered and machine is turned on).
As required
As required
As required
As required
1 x per month
According to indicator
REV.4 SEPT.2003
3. OPERATION
Display
Hot water
Cappuccino
Cappuccino
Quantity
programme
Cappuccino
Page 13/25