Saeco Classic Service Manual page 26

3. OPERATION
Action
17 Hot water
Quantity programme
18 Cappuccino
(only when cappuccino
maker programme is
deactivated in the user menu)
19 Cappuccino
Quantity programme
(only when cappuccino
maker programme is
activated in the user menu)
20 Cappuccino
Quantity programme
Note: The Steam and Cappuccino functions can be used parallel to the coffee programme in the Royal
Professional Instant Steam, Royal Cappuccino and Royal Cappuccino Redesign systems.
Empty dregs drawer
Empty drip tray
Clean water tank.
Clean coffee bean container.
Clean the housing.
Rinse brewing unit
Clean brewing unit and
lubricate
Clean filter
Descale
1. Place Saeco descaler into fresh water tank.
Descale:
2. Fill with about one litre of hot water.
3. Remove about two to three cups via the brewing unit (cannot be poured).
4. Activate the Descale item in the user menu by selecting OK and open the HWS valve
(place a sufficiently large container under the steam pipe). The descaler mixture is pumped
at intervals through the circuit.
5. Rinse: Fill the water tank once again and open the steam valve (about 2-3 cups via
brewing unit).
Reset: Under the descale indicator item (Enter - YES - Enter).
8/25
Comments
The last programme saved is
activated by pressing the hot
water button briefly.
Cappuccino maker
Press the cappuccino button
briefly to start cappuccino
dispensing; press again to stop.
Keep the cappuccino button
pressed for the desired time.
The last programme entered is
saved
The last programme saved is
activated by pressing the
Cappuccino button briefly.
Cleaning
Storage capacity of 30 tablespoons (dreg counter reset only if warning
to empty grounds container is triggered and machine is turned on)
After 30 servings
As required
As required
As required
1 x per week
1 x per month
Depending on water hardness.
REV.4 SEPT.2003
ROYAL
Display
Hot water
Cappuccino
Cappuccino
Quantity
programme
Cappuccino
Saeco International Group